So I've been mia for the last week, hiding in a dark lab, with a few monkeys transplating my PC into new Mountain Mods chassis. Below is from old to new with subtitles.. in 3d.. okay maybe not 3d, but the best the iPhone 4 camera could do.


New Parts are here!, bottom, cross bars, back peices and 5.25 trays, along with both motherboard trays

Front and back walls

Front, bottom, and back together

Its late, and I had to work in the morning, so me attempts to mock what the inside of the case will look like

The old, thermaltake case, moded to hell, dual rads and fans mounted in angle iron to the right

Close up of the old system/setup

Motherboard in its tray, some of the cards installed, getting cpu ready for a new application of diamond thermal compound

Hardware fully mounted, purging / filling of the liquid system


Tear down and insert into new case

Still filling

From the left side, where future new pc will be going


PC Powersupply installed, finishing wire up to actual pc hardware

Everything wired up, ya its a mess, powersupply has waaay to long of cables for this case

All finished

Case is now in its new home
Ignore the paper, i didnt have any 5.25 blackouts on hand, so tape + paper had to do for the moment.
And thats it, this PC is on the right hand side, the new I7 I will eventually be building will go on the left side, which in the last picture you'll see as the empty side
Specs:
M/B: Asus P5E Deluxe
CPU: Q9560 OC'ed to 4ghz
Mem: 8GB DDR2-1200mhz
HDDs: Striped 2x64GD SSD's, 1TB Seagate, 320GB Seagate
Controller: Acera 1210 256MB cache for SSD array
Video: ATI 5970
Tubing: 1/2 inch ID Tygon
Coolant: Fester Non-conductive
Rads: 2x Black Ice 280's (I think)
Fans: 4x120mm each at 78cFm @ full speed
Life: Still none